2018 Mahindra 2538 HST

Call for Price


New/Used
New
Availability
In Stock
Location
Burke Truck & Tractor
Stock #
15342
Title
Clean
Condition
Excellent
Year
2018
Manufacturer
Mahindra
Model
2538 HST

Overview

Dealer Insights

LOADER ATTACHED #1038

Description

A solid choice for general-purpose farming, agriculture, livestock and grounds maintenance, this tractor is an economical and easy to operate 4WD, Tier IV workhorse. Powered by our unique mCRD™ engine technology for reduced emissions, this tractor provides reliable performance and added fuel efficiency. Available in 37 to 65 HP and 3- and 4-cylinder engines, this tractor allows you to customize your machine to your specific operation. Coupled with our optional heavy-duty loader and backhoe (among other attachments), this tractor is a sure-fire bet to best suit your needs.

Features
  • Revolutionary Tier IV mCRD technology
  • Powerful, reliable 37hp 4-cylinder engine
  • Flat deck platform
  • Modern dash and switches
  • Redesigned front grill
  • Hood lifts high, panels come off, no tools required
  • Tilt Wheel
  • Great visibility
  • Rounded fenders
  • Shifters at operators sides, not on the floor
  • Great serviceability access
  • Comfortable padded rubber floor mat
  • Redesigned headlight assembly
  • Heavier three point linkage
Engine
  • Type: Naturally aspirated direct-injection diesel
  • Cylinder: 4
  • Engine HP (kW) @rpm: 37.4 (27.5) @ 2400
  • Compression Ratio: 18.7:1
  • Displacement cubic inch3 (cc): 166.7 (2732)
  • Fuel Tank Capacity: 9.0 gallons
Electrical
  • Battery Capacity: 12 V, 80 AH
  • Alternator: 12 V 45A
Clutch
  • Type: Damper
Transmission
  • Type: HST-3 range
  • Number of Gears/Speeds: Infinite
Steering
  • Type: Hydrostatic/tiltable
  • Pump Output (gallons per minute): 4.1
Brakes
  • Type: Wet disc
Hydraulic System
  • Type: Open Center with position control
  • Pump Output (gallons per minute): 7.6
  • 3-Point Linkage: Category 1 with check chains
  • Lift Capacity (lbs.): 2646
  • Rear Auxiliary Remote Valves: 1 spool optional
PTO
  • Type: Independent
  • PTO RPM (engine rpm): 540 @ 2400
  • PTO HP (kW): 31 (23.1)
Operating Weight
  • Total (lbs): 3130
Dimensions with Industrial Tires
  • Overall Length Inches (mm): 119.3 (3030)
  • Overall Width Inches (mm): 63.2 (1605)
  • Overall Height Inches (mm): 94.4 (2400)
  • Turning Radius Minimum Feet (meters): 7.87 (2.4)
Tires - Sizes and Options
  • Ag (Front/Rear): 7-16 6PR / 11.2-24 4PR
  • Industrial (Front/Rear): 10-16.5 / 43x16-20
  • Turf (Front/Rear): N/A
Optional Attachment - Loader
  • Loader Model: 2538L
  • Maximum Lift Height: 101.4 in.
  • Clearance with Bucket Fully Dumped: 79.3
  • Reach at Maximum Dump Angle: 21.5
  • Maximum Dump Angle: 40 deg.
  • Attachment Rollback Angle: 30 deg.
  • Digging Depth Below Grade: 4.5 in.
  • Lift Capacity to Maximum Height at Pivot Pins: 1634
  • Breakout Force @ Pivot Pins: 2696
  • Rated Flow (Tractor System): 7.6 gpm
  • Attachment Width: 66 in.
  • Attachment Rated Capacity: 10.8ft. 3
  • Cycle Times @ rpm: 2400
  • Raise Boom (seconds): 3.5
  • Lower Boom (seconds): 2
  • Dump Attachment (seconds): 2.6
  • Retract Attachment (seconds): 1.5
  • Loader Transport Weight: 985
Optional Attachment - Backhoe
  • Backhoe Model: 2538B
  • Transport Height (max): 119 in.
  • Transport overhang: 44.7 in.
  • Maximum Digging Depth: 94 in.
  • Digging Depth (2’ flat bottom): 92 in.
  • Overall Operating Height- fully raised: 120 in.
  • Loading Height (bucket at 60°): 63 in.
  • Loading Reach (bucket at 60°): 51 in.
  • Reach from Swing Post: 127 in.
  • Bucket Rotation: 175 deg.
  • Swing Arc: 180 deg.
  • Stabilizer Spread Operating Position: 101 in.
  • Stabilizer Down Below Grade: 11 in.
  • System Relief Valve Setting (psi): 2050
  • Digging Force - Bucket (lbs.): 3190
  • Digging Force - Dipper (lbs.): 1980
  • Transport Weight (lbs.): 1271
NOTES:
Specifications and design subject to change without notice.

Specs

Engine

Engine Type
Naturally aspirated
Horsepower
37.4 hp (27.5 kW)
PTO HP
31 hp (23.1 kW)
Rated RPM
2400 rpm

Specifications

Height
94.4 in. (2400 mm)
Width
63.2 in. (1605 mm)
Weight
3130 lb.
Tire Size
Ag (Front / Rear): 7-16 6PR / 11.2-24 4PR ; Industrial (Front / Rear): 10-16.5 / 43x16-20

General

Fuel System
Direct injection diesel
Fuel Capacity
9.0 gal.
Transmission
HST-3 range
Brakes
Wet Disc
Hydraulics
Type: Open center with position control; Pump Output: 7.6 gpm
Drive Type
4WD

Promotions